View Single Post
  #8  
Old 02-25-2008, 08:43 PM
djwhog's Avatar
djwhog djwhog is offline
Dyno Dave
 
Join Date: Feb 2007
Location: WY
Posts: 208
More HP and better MPG from a hemi

OK found some tuning / performance stull geared for the late hemis. These guys seem to be one of the best in the buis. They are not cheap though.

I like that you can add 40-50 bolt on HP on the new 6.1 I think this looks like a nice kit. So instead of a complete engine you can get the T-Body, programmer and cold air kit.


http://www.arringtonengines.com/

New from the factory with a 3 year/36,000 mile warranty
  • Stock engine delivering 425 Horsepower
  • Cast aluminum barrel-shaped intake
  • Stainless Steel Performance Header System (Pair)
  • Cast aluminum oil pan with wet sump
  • The Fuel Air Spark Technology XFI Fuel Injection and Ignition system with our tuning calibration.



Our engine comes with an Arrington-calibrated EFI system from F.A.S.T.
Performance 6.1 HEMI SRT-8 465 Hp
Arrington HEMI Performance Package

  • 90mm Throttle Body
  • Software to load on computer
  • XFI Fuel Injection Box
  • XIM Ignition Box
  • Wiring Harness to fits all makes

HEMI 426 Late Model
This is our modern twist on the classic 426 that dominated NASCAR and the road in the muscle era. 585 HP with 560 Ft-lbs. of Torque. 30 % Increase in Torque and Power over the stock 6.1 HEMI at 160 mph. Both while maintaining a smooth ride! We have installed this engine in a Chrysler 300C and run it as an everyday car. The engine is comfortable and quiet with normal use, but ready to jump out of any stoplight and tear up the middle lane. "The drive ability is amazing".



HEMI 5.7l – 6.1l 90mm drive-by-wire throttle body
Pre-Order yours TODAY. The first 50 throttle bodies will be individually numbered. Reserve now to receive your number! This part is scheduled to ship March 21st 2008.*

Finally, a plug-and-play** replacement throttle body for your 2005 – 2008 HEMI 5.7 and 6.1 LX body.

This fully CNC’ed T-6061, aerospace grade, billet aluminum throttle body has a full 90mm bore and is a direct, bolt on replacement for the stock 80mm unit. Handcrafted in the USA; this throttle body adds 18 to 23 dyno proven horsepower over the stock unit. AND it interfaces with the stock computer; no messy throttle cable or electronic glitches.

Add our Cold Air Induction system and tuning for up to a 50 HP increase over stock on a 6.1 SRT8! This system offers the best horsepower per dollar value today.

Pre-production orders are now being accepted; quantities are limited; don’t miss out!

Price does not include a refundable core charge added at check-out.

*Shipping Date is a high confidence target; but is not guaranteed.

**Tuning required; this unit flows 178 CFM better then stock. Lean Air/Fuel ratio can cause catastrophic engine damage!

Specifications
[IMG]file:///C:/DOCUME~1/YCS/LOCALS~1/Temp/msohtml1/01/clip_image001.gif[/IMG]
Pre-Order yours TODAY. This part is scheduled to ship March 21st 2008.*
  • Direct, Bolt on Replacement throttle body for your 2005 – 2008 HEMI 5.7 and 6.1 LX body.**
  • T-6061, aerospace grade, billet aluminum
  • full 90mm bore
  • Handcrafted in the USA
  • Adds 18 to 23 dyno proven horsepower over the stock unit
  • 819cfm at Wide Open Throttle
  • 178cfm better than stock
  • Interfaces with the stock engine controll computer**
  • No Manual Throttle Cable Required
Pre-production orders are now being accepted; quantities are limited; don’t miss out!

Price does not include a refundable core charge added at check-out.

*Shipping Date is a high confidence target; but is not guaranteed.

**Tuning required; this unit flows 178 CFM better then stock. Lean Air/Fuel ratio can cause catastrophic engine damage!

Reply With Quote