Baseline Dyno data for stock R/T 6-speed

[SilverClutch]

Finally got the chance to perform a baseline dyno run on my 2009 R/T 6-speed. Three pulls performed at McNew's Automotive in Dillsburg PA. Great bunch of guys, and now my home hot rod shop.

http://i207.photobucket.com/albums/b...long/image.jpg

3 pulls with the following numbers:
#1 HP 334.31 Torque 366.62
#2 HP 338.39 Torque 368.97
#3 HP 335.73 Torque 373.51

Tank was half full with Shell 93 octane (no ethanol). Car seems to perform better with straight gasoline (including better mileage).

More pulls will follow as the mods are added. K&N 63 series, BT catch can, skip shift eliminator along with a "custom" tune (no Diablo or chips) by McNew's to follow, likely in March.

[SilverClutch]

My R/T is scheduled to hit the dyno rollers again on March 18th to measure the changes achieved from the installation of the K&N CAI and a change in plugs to one-step colder plugs (which should smooth out the readings that seem to be picking up "chatter" from the knock sensor).
I will also finally add the skip-shift eliminator and a Hurst shifter with a white, billiard-ball handle.

I will post the numbers by next weekend.