Please welcome ERL Performance - our newest site supporting vendor!!

[RapidTransit]

Contact info:
Forums user name: ERL Performance
Name: Sean Ragains
2560 Charlestown Road
New Albany, Indiana 47150
Toll Free: 877-815-3434
Phone: 812-945-3435
Fax: 812-944-8808
CustomerService@ERLPerformance.com
www.erlperformance.com


Background:
The short block assembly is one of the most critical procedures in any engine build. No one understands that better than ERL Performance. The company was founded with machinist and tool & die makers that have manufactured precision gages to jet engine parts, the build process is done right. Our ability to utilize equipment, tooling and knowledge from these areas simply isn’t feasible for standard engine shops.

In an industry where close is good enough, ERL Performance takes a different approach. We believe the best method is a solid foundation. If the block and short block assembly is done right, then bolt on power upgrade can be added in the future. As your desire for performance increases, the money can be spent on the upgrade and not on the short block again.

The ERL Hemi 426 Short Block is now available direct from ERL. This short block is known to be the finest on the market. We started out building all of Power Ported’s Hemi Short blocks. The short block is built for power levels up to 1200HP. These quality Hemi short blocks that were exclusively for Power Ported are now available to everybody. ERL will continue to guarantee their short blocks with a 3 year/36,000 mile warranty.

Every short block comes with Wiseco pistons with GFX rings, K1 rods, and K1 crank. The street/strip package blocks are fitted with stock main studs. This is an economical package well suited to Applications below 500HP. All of the Street/Strip blocks are fitted with ARP main studs and align honed. This package is particularly good for forced induction applications or naturally aspirated applications exceeding 500HP. ARP head studs are available as an option on both packages.

HEMI 426 STREET
Displacement: 426 CI, 7.0L
Bore x Stroke: 4.060 x 4.080
Compression Ratio: 9:1 or 11:1
Fuel: 93 Octane
Block: HEMI 6.1L
Crank: K1 Forged 4340
Rods: K1 Billet H Beam
Pistons: Wiseco
Rings: Wiseco GFX
Main Studs: Stock

HEMI 426 STREET/STRIP
Displacement: 426 CI, 7.0L
Bore x Stroke: 4.060 x 4.080
Compression Ratio: 9:1 or 11:1
Fuel: 93 Octane
Block: HEMI 6.1L
Crank: K1 Forged 4340
Rods: K1 Billet H Beam
Pistons: Wiseco
Rings: Wiseco GFX
Main Studs: ARP

RapidTransitView Public ProfileSend a private message to RapidTransitSend email to RapidTransitFind all posts by RapidTransitAdd RapidTransit to Your Contacts